Cyelee WOLF2 Red for Astigmatism, Circle Dot Sight, for RMR Footprint

  
The WOLF2-G has a long-lasting battery life from a single CR1632 which is easily replaced without need to remove the optic. Featuring adjustable brightness levels that make sense, low-profile buttons for concealed carry use, and a large crisp objective lens with great styling. ONLY FOR RMR OR 407C/507C FOOTPRINT. MDS Stands for Motion Deactivated Standby, Cyelee Optics products will NEVER have an automatic shut-off, they can ONLY be shut off by manually holding the down/- button for 4 seconds. However while ON the optic is always checking if it needs to go into MDS Mode. Walking with, or even heavy footsteps near your optic, will keep your optic awake, however, if it senses no movement for 5-7 minutes it will enter MDS Mode, when it senses motion in MDS Mode it will display the red dot within a second. The STIG-RS(Astigmatism Relief System) reticle system, is made for users with astigmatism, and feedback is clear, many see benefits using our STIG-RS LED emitters. Additionally, a larger 64MOA circle allows for lower brightness settings without harming reticle acquisition time, passively assisting. Windowless Waterproof LED Emitter Technology. You will never have to clean your LED emitter window again while remaining fully IPX7 waterproof! Illumination Settings: 8 Daytime / 2 Night time. Reticle: Green Circle Dot Reticle. Battery: 1 x CR1632 with up to 50,000 hours of battery life. Made specifically to fit mounts or slides cut for RMR/SRO or 407C/507C/508T products. For GLOCK MOS Using RMR adapter plate (Plate not included) - excludes Slimline models, such as glock 43x mos/ glock 48 mos? For Walther Arms Q4/A5/PDP Using RMR adapter plate (Plate not included). For Springfield Armory OSP(full-size models) Using RMR adapter plate (Plate not included), Not for hellcat/ hellcat pro/XDS MOD 2 OSP. For CZ-P10 F/C Using RMR adapter plate(Plate not included). For Smith & Wesson C. Using RMR adapter plate(Plate not included).

For FN 509 MRD & Tactical Series/FNX Using RMR adapter plate(Plate not included). O Using RMR adapter plate(Plate not included).

For Beretta APX RDO Using RMR adapter plate(Plate not included). For Canik TP9SFx, Canik TP9 Elite Combat, Canik TP9SF pistols Using RMR adapter plate, Canik TP9SA pistols using RMR adapter plate(Plate not included).

DOES NOT FIT COMPACT PISTOL. All product and company names are trademarks or registered trademarks of their respective owners. Their use does not imply affiliation or endorsement by these companies.

All product names, logos, brands and other trademarks or images shown or mentioned are the property of the respective brand owners. Compatibility may be based on screws not included with the optic.

A minimum of 4 properly seated thread lengths on both screws that are securely attached to the slide should be maintained at all times for safe operation. Please clean slide and screw holes before installing, inspect before using, and use self supplied thread locker if deemed necessary.