ADE is introducing all new APOLLO PRO(RD3-030PRO). This ADE APOLO PRO is designed to fit any pistol/mounting plate/slide/optic cut with RMS/RMSC screw pattern/footprint.Equipped with Solar Power that allows the red dot sight to continue to be powered when your battery is out. The battery life can last up to 50,000 hours depending on settings.
The APOLLO PRO is always powered on and features an auto-dimming sensor which regulates proper dot brightness based on ever changing ambient light conditions. The brightness will turn high and low accordingly to the environment brightness. Operates with a single CR2032 3v battery.There is no physical on/off/brightness button. The sensor does it all.
Sig P320 Xten (Using Sig provided plate marked for Leopold Deltapoint Pro optic footprint). Sig P365-380(make sure your model is exactly called "P365-380", not P360 or P380). Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS).Springfield XDS MOD 2 OSP. Springfield Elite 3.8 Compact OSP 9mm. S&W Shield 2.0 Optics Ready. S&W M&P9 shield plus Optics Ready. S&W M&P shield plus performance center. Walther PPS M2 Optics Ready. Plus any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint.
Ade APOLLO PRO created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight.
Comes with the adjustment tool, user manual, lens cloth, red dot cover, CR2032 battery, screws. Parallax-free & Unlimited Eye Relief. Made of aircraft aluminum in anodized black finish with multi-coated lens. Weight approximately 17.5 grames(0.61oz), (Length)1.6" x (Width)1" x (Height).
The objective lens is 22mmx16m/0.87"x0.63". Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed.ADE makes the red dot to accept the industrial standard footprint. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. ADE RD3-006B, RD3-009, RD3-012, RD3-013 and RD3-028 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa(and pro) and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint.
ADE RD3-019 Stingray RD3-020 Raptor, RD3-023 Valkyrie and RD3-029 Trumpet fit optic cut/optic plate/ that is compatible with Trijicon RMR/SRO/Holosun 407C/507C footprint. ADE RD3-021 NUWAcc fit optic cut/optic plate/ that is compatible with Trijicon RMRcc footprint. Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.
Below are additional footprint about ADE footprints. ADE, RD3-006 Huracan, RD3-009 Crusader, RD3-012 Delta, RD3-013 Bertrillium fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. RD3-015 Zantitium, RD3-028 Ares fit plate(does NOT fit slide due to larger size) that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint.
Please note: Some aftermarket slides have a precise optic cut based on the curved edge/corner of Vortex Venom, one of the common slide manufacturers is PSA Dagger(with Doctor cut). ADE and other brand red dots do NOT have the same curve as Vortex Venom, therefore ADE RD3-006, 009, 012, 013 do NOT fit the aftermarket slide with CURVED vortex venom optic cut. ADE red dots with Doctor footprints only fit squared optic cuts that accept standard Doctor Footprints. ADE RD3-018 Spike, RD3-021 Nuwa and RD3-030 Apollo fit optic cut/optic plate that is compatible with shield RMS/RMSC/Deltapoint Pro footprint. ADE RD3-021c NUWAcc fits optic cut/optic plate/ that is compatible with Trijicon RMRcc footprint.
We always reply emails within 8 hours. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item.