Vortex Optics Crossfire Red Dot Sight (CF-RD2) & 3X Magnifier w/Built-in Flip Mount (VMX-3T). Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial.
Move the dials in the direction you wish the bullets point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.
Mounting the Crossfire Red Dot. The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount. Attach the unit to the rail/base with the illumination dial positioned on the right side. Make sure the mount is solidly seated in the base groove.
In order to prevent recoil injury, position the Red Dot so you have at least four inches of eye relief. Be sure the base clamp is hooked around the outside of the rail/base.Press the Red Dot downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench. Use the focus knob to achieve a sharp image.
Turn the focus dial clockwise or counter-clockwise until image is as sharp as possible. Using the included screws, attach the VMX-3T magnifier to the Flip Mount. Ocular lens and Release Button should face shooter. Absolute Co-Witness Height with Flip Mount. Positions the VMX-3T at 37 mm from the base surface to the center of the optic.This puts the dot height at a center (absolute) sight picture when co-witnessed with standard iron sights. For this height, do not install the included shim plate. Lower 1/3 Co-Witness Height with Flip Mount and Shim Plate. Positions the VMX-3T at 40 mm from the base surface to the center of the optic. This puts the dot height at a lower 1/3 sight picture when co-witnessed with standard iron sights. For this height, install the included shim plate between the VMX-3T and the Flip Mount. If the wrong contact details are provided any losses incurred as a result will be the buyers responsibility. INTERNATIONAL BUYERS - PLEASE NOTE.
The item "Vortex Optics Crossfire Red Dot Sight CF-RD2 3X Magnifier Built-in Flip Mount" is in sale since Wednesday, March 11, 2020. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Scope Mounts & Accessories". The seller is "sports-and-gadgets" and is located in Brookline, Massachusetts.
This item can be shipped to United States.