For Glock, this ADE Spike red dot ONLY FITS Glock 43x MOS and Glock 48 MOS. This red dot does NOT fit Non-MOS(optics ready) model. If user has a Glock 43x or Glock 48. This ADE Spike will NOT fit. Designed to fit Canik Elite TP9 SC, Canik Mete SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide made for Shield RMSC/RMS, Sig Romeo 0, JPOINT4, Swampfox Sentinel Micro, Holosun HS407K & HS507K, Riton X3 Tactix MPRD and other same footprint sights.Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. ADE SPIKE red dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness. (Length)1.6 x (Width). Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed.
ADE makes the red dot to accept the industrial standard footprint. ADE Does not know the screw spec every pistol manufacture used for their screw hole.Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can't get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be "sleeping" in a very very low power mode. Ade SPIKE created a iron sight curve at the end of the body, and also added two white dots on the curve.For the rear of part of the red dot. To become a back up iron sight. With the ultra short design, the red dot provides a distance. /gap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Spike's rear white dot will acts as a pistol factory original rear sight for Co-Witness. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands. Ade Advanced Optics model RD3-011 is designed to fit slide/footprint/ pattern of mounting plate made for of Trijicon RMR only. Therefore any mounting plate made for Trijicon RMR will fits RD3-011. We always reply emails within 8 hours.
All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Red Dot & Laser". The seller is "opticsfactory" and is located in this country: US. This item can be shipped to United States.