ADE Just Released The New 4MOA GREEN Dot version of the RD3-018 SPIKE! This is the GREEN DOT that customer have been waiting! The Spike now available in 3 models.
Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot. Designed to fit Canik Elite TP9 SC, Canik Mete SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide made for Shield RMSC/RMS, Sig Romeo 0, JPOINT4, Swampfox Sentinel Micro, Holosun HS407K & HS507K, Riton X3 Tactix MPRD and other same footprint sights.
Ade SPIKE created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the green dot. To become a back up iron sight.
With the ultra short design, the. /gap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Spike's rear white dot will acts as a pistol factory original rear sight for Co-Witness.Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. Dot sight is always powered on with automatic brightness.
Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness.(Length)1.6 x (Width). Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint.
ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can't get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be "sleeping" in a very very low power mode. Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers.
During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. Below are the footprint information about ADE red dots. ADE RD3-006B, RD3-009, RD3-012, and RD3-013 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint. ADE RD3-018 Spike, RD3-021 Nuwa fit optic cut/plate that is compatible with Shield RMS/RMSC/Leopold Deltapoint Pro/Sig Romeo Zero footprint.
ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie Gen2 fit optic cut/optic plate that is compatible with Trijicon RMR/. We always reply emails within 8 hours.
All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Red Dot & Laser".
The seller is "opticsfactory" and is located in this country: US. This item can be shipped to United States.