ADE Red Dot Reflex Sight For CANIK TP9SFX Handgun and Glock MOS Pistol RD3-013-C

  
It fits certain canik tp9, such as TP9 SFX and TP9 Combat. Basically your canik MUST comes with several plates, this sight fits on one of the plate marked as #01 plate for doctor/vortex type screw hole. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. This model does NOT fit the new Canik TP9 Elite SC and Springfield Hellcat, ADE is releasing a new model called SPIKE(RD3-018) will fit rms/rmsc footprint. Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight. Fits directly on Canik using Canik provided mounting plates. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.

Top load System, no need to Remove the sight to change the Battery. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail. Red dot DOES NOT auto power off.

It stays on til use manually power off. It has multi brightness level with one adjustment button.

Ress and hold the switch for 3 seconds to turn on or off. To adjust brightness, quick press to adjust the brightness from low to high. When you first time turn it on, it will be the lowest setting. This setting is invisible to human eyes, it can only be seen through a night vision device. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot.

Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands. Ade Advanced Optics model RD3-011 is designed to fit slide/footprint/ pattern of mounting plate made for of Trijicon RMR only.

Therefore any mounting plate made for Trijicon RMR will fits RD3-011. ADE RD3-006, RD3-009, RD3-012, RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS.

ADE sights has the footprint of Doctor/Vortex Venom type footprint. ADE RD3-006, RD3-009, RD3-012 and RD3-013 fit directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions.

There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter.

If you cant get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size. As such, the more you save the more we make. Please allow up to 24 hours for a response. If you give us the chance, we will make every effort to make it right for you!

We strive for five stars from you in feedback and work hard to earn it. The item "ADE Red Dot Reflex Sight For CANIK TP9SFX Handgun and Glock MOS Pistol RD3-013-C" is in sale since Wednesday, August 21, 2019.

This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Red Dot & Laser Scopes". The seller is "opticsfactory" and is located in Oregon City, Oregon. This item can be shipped to United States.

• Model: RD3-013MOS
• Reticle Color: Green
• Type: Dot
• MPN: Does Not Apply
• Brand: ade advanced optics