Comes with a ADE RD3-012 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols. This plate also fits Taurus G3 with Original Rear sight(see photo). Depends on the Taurus model, filing the corner of the dovetail insert of the plate from 90 degree to 45 degree might be required(see photo demonstration). Some Taurus models has TRAPEZOID shaped rear sight cut that has a 45-degree edge, some has RECTANGLE shaped rear sight cut that has a 90-degree edge. This optic plate is made with 90 degrees insert.
If user has trapezoid rear sight cut, user need to file the 90-degree angle down to fit. The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing. Top load system, no need to remove the sight to change the battery.
Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off. 1.75" length x1.25" width x1.15 height. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens.
No plastic body, no plastic lens. Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim. Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. We recommend hiring a professional gunsmith.
Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Shock proofFog proof and Waterproof for 30 minutes under 4ft water. Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands. Ade Advanced Optics model RD3-011 is designed to fit slide/footprint/ pattern of mounting plate made for of Trijicon RMR only.
Therefore any mounting plate made for Trijicon RMR will fits RD3-011. We always reply emails within 8 hours. All NFA rules apply, where applicable. YOU are responsible to following ALL laws and regulations regarding the ownership, possession and end use of this item. The item "ADE RD3-012 Delta Red Dot Sight + Optic Mount Plate For Taurus PT111 G2, G2C, G3" is in sale since Sunday, August 15, 2021.
This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Red Dot & Laser Scopes". The seller is "opticsfactory" and is located in Oregon City, Oregon. This item can be shipped to United States.